Easy to Clean Grate Magnets In-Housing

Grate Magnets In-Housing - Easy to Clean, Rare Earth by Eriez

Eriez Easy to Clean Grate Magnet in Housing
Grate in Housing cleaning is reduced to a simple push-pull operation with Eriez Easy to Clean Tramp Iron Grate in Housings. The ETC incorporate the same Erium™ Ceramic or Rare Earth magnet material to remove ferrous contamination from free flowing products as it cascades through multiple grate rows combined with a simple push-pull cleaning operation.


  • Two rows of staggered magnets
  • 1 inch diameter magnet tubes on 2 inch centers
  • Stainless steel tube scrapers
  • Metal contaminant discharge chute
  • All stainless steel construction
  • Glass bead surface finish
  • 150°F Max Temp

Also available:


With Eriez' single-skinned tube design, the iron is removed with a stainless steel split ring sandwiched between two floating wipers. As the individual banks cycle tramp iron is stripped from the tubes outside the product zone. The tramp metal is then discharged through a small chute at the front of the housing. The traditional magnet cleaning cycle is reduced to a simple push-pull operation.

Eriez manufactures standard grate housings but will custom design anything to fit your installation requirements. Typical units include a rectangular housing that holds multiple rows of powerful tube magnets that attract and hold fine ferrous contamination as material cascades around the magnets. Optional features include adapters to transition your product flow into the grate housing, additional magnet rows depending upon specific separation efficiency requirements and vibrators to help products flow quickly through the grate housing.

Need to check your magnet strength? Eriez Pull Test Kit VIDEO will take you through our magnet inspection procedure step by step. Need some additional help? Contact us directly for documented instructions, guidelines and real in-person support.

Get a Quote

Call us at (281) 350-0550

or email us at info@approtec.com